Why is my Styku laptop or tablet screen black or not turning on?

If your Styku laptop or tablet screen is completely black but the device seems powered on (for example, keyboard lights are still lit), a force restart is usually all it takes to fix the problem. If that does not work, next steps depend on whether the screen comes back on after the force restart — see Step 2 below.

Step 1: Perform a Force Restart

Press and hold the power button for 15–20 seconds until the device shuts off completely.
Wait 5–10 seconds.
Press the power button once to turn the device back on.
Watch for the screen to light up during startup.

If the screen comes on and Windows loads normally, your device has recovered. Open Styku Studio and confirm scanning works before your next appointment.

Step 2: Next Steps If the Force Restart Did Not Fully Resolve the Issue

What to do next depends on whether the screen came back on after the force restart.

If the screen came back on but the device is still behaving oddly

If the screen is now displaying an image — for example, the device is stuck on a logo, running slowly, or the Styku app will not launch — the device may have a pending Windows update that became stuck during installation. Our support team can connect to your computer remotely using TeamViewer to check and fix this.

To prepare for the remote session:

Leave the device on and open TeamViewer on the Styku computer.
In the TeamViewer main window, locate the Your ID and Password fields under the Remote Control section.
Write down or copy both values exactly as they appear.
Submit a support ticket through the Styku Business Portal at https://www.styku.com/portal and include the TeamViewer ID and password so our team can connect.

During the remote session, our team will:

Check for any pending or failed Windows updates
Apply updates if needed
Restart the device and confirm it is working correctly

Important Note: Before installing Windows updates, disconnect the Styku sensor tower and turntable from the computer. Some Windows updates change hardware drivers and will not install properly if the hardware is connected. Reconnect the Styku hardware after updates are complete and the computer has rebooted.

If the screen is still completely black after the force restart

If the screen remains completely black and Windows never loads, a remote support session is not possible — our team cannot connect to a computer that is not displaying a desktop. In this case, please contact a Styku support specialist directly through the Styku Business Portal at https://www.styku.com/portal. A specialist will follow up with you for hands-on troubleshooting, which may include hardware evaluation and, if necessary, arranging a replacement device.

Using a Temporary Windows Computer While You Wait

If your device cannot be recovered quickly and you need to keep scanning, you can install Styku Studio on any Windows 11 computer that meets the minimum requirements:

Operating System: 64-bit Windows 11
Processor: Intel Core i5 or i7, 10th Generation or newer
RAM: 8 GB or more
Storage: 256 GB SSD or larger
Display: 1920×1080 resolution
Ports: At least one USB 3.0 Type-A port and one USB 2.0 Type-A port

To get set up on a temporary computer:

Download and reinstall the Styku software.
Install the software and open Styku Studio.
Enter your account email address, password, and license key. You may need your license key reset — contact Styku Support through the business portal at https://www.styku.com/portal to have your license reset if needed.
No data will be lost, as scans are stored on Styku’s servers.
Connect the camera tower and turntable to the temporary computer using their USB cables, and plug in the turntable power adapter.
Confirm both devices are recognized in Styku Studio before starting a scan.

Note: Your license can only be active on one computer at a time. If your original device is still activated, contact support before activating on the temporary computer so they can assist with the transfer.

When a Replacement Device Is Needed

If the force restart and any subsequent troubleshooting do not resolve the issue, our support team will evaluate whether a replacement computer is warranted. If you have a Styku Care protection plan, a replacement can be arranged through an RMA (return merchandise authorization) process. Once a replacement ships, you will receive tracking information by email. When it arrives, use the included packaging to return the original device within the timeframe provided.

If this resolves your issue, no further action is needed.

If the problem persists, contact support and include: a description of what the screen shows (completely black, stuck on a logo, etc.), whether any lights or sounds indicate the device is powered on, what happened immediately before the issue started (e.g., an update or restart), whether the force restart was attempted and what happened, and — if you were able to get to the Windows desktop — your TeamViewer ID and password so our team can connect remotely.

Applies to: All Styku configurations that include a laptop or tablet computer (Styku X2, Styku X2L, Styku X2 Pro); Styku Studio; Windows 10 and Windows 11.

My computer crashed, how do I reinstall Styku?
Why is my computer running so slow? How can I make my Styku computer run faster?

Still need help? Submit a service ticket in the Styku Business Portal.